How To Build A Fence

When it comes to building a fence I would recommend calling in a professional. If you do decide to DIY (do it yourself) or have fence repairs to tackle, make sure you do your homework and ask questions before you start any project. Whether you do it yourself or hire a pro here are some important tips that will help your fence stand the test of time.

Tips For Building a New Fence

Do I Need A Permit To Build A Fence?

Will you need a permit to build a fence? Probably not, but it’s a good rule of thumb to always check with your local municipality for up to date building codes. Also, check your survey and make sure there are no issues or easements with your fence. I once heard about a homeowner that was ready to sell their home only find out that their fence was encroaching on the neighbours property. It should have been highlighted when the property was originally bought but it was never disclosed. The neighbours wouldn’t settle and the homeowner had to remove part of the fence and mark out the property line with paving stones.

Pay Attention To Property Lines

Make sure you know where your property lines are before you a start fence installation or repair. There also might be bylaws on the fence height and appearance.

I’m sure you’ve seen fences that are back to back. This probably means that at some point the two neighbours weren’t willing to be very neighbourly and built two fence walls back to back, each on their own property. Hopefully, with your new fence, you can share the one fence line and the costs. If you do, it might also be a good idea to have some sort of written agreement in place before any construction starts.

Call Before You Dig

Remember to call before you dig so all your underground utility lines are clearly marked. Do your homework.

Replacing an Existing Fence

If you are replacing an existing fence or doing major repairs, make sure it was installed in the correct spot in the first place.

Finding out now will save you a lot of headaches when its time to sell your home, as noted above.

When it comes to replacing fences or any existing outdoor projects, keep in mind the do’s and don’ts of before you get started on your projects.

How-To Install a Fence Post

What is the best way to put fence posts in the ground?

Fixing or installing a fence post with concrete is time consuming and labor intensive. I prefer an expanding foam, which replaces two bags of concrete. It’s called Sika Post Fix — an easy-to-prepare, mix-in-the-bag and fast setting polyurethane foam.

Sika PostFix Fence Post Mix

This is a two component, mix-in-the-bag expanding foam that I’ve been using on my projects. Here is how it works:

Roll the pouch, starting at the compartment containing Component A, working towards the ‘burst seal’ in the direction of the arrows shown on the back label.
Apply pressure to the rolled section to rupture the seal and allow Component A to flow into the compartment containing Component B.
Mix thoroughly by then rolling out the pouch and rubbing the bag along a table edge or any 90 degree surface (no sharp edges).
Mix for 15 seconds only by forcing the material to travel inside the bag, from one end to the other (using a “shoe shining” technique)
Cut the bag open with scissors at the corner
Pour mixed material into the hole. Empty the bag into the hole, pouring some of the material on to the post itself

Basic Fence Building Checklist

10) Fence Layout

Make sure your fence layout is clearly marked with stakes and line (and checked against a recent survey to make sure you are within your property line). It’s a good idea to mark your fence approximately 6” from within your property line to accommodate the post and fence structure, less space is required if you are doing a chain link or metal fence.

9) Check for elevated ground or slopes

Remember to address any slopes or elevated ground that may affect your fence layout and installation. For minor sloping, you can use a racked fence, which means the rail (the horizontal bar between fence posts) remains parallel to the ground in all panels. For steeper slopes use a stepped fence format, which looks exactly like it sounds, your fence will look like steps. Take care when doing a stepped fence, as you will have to individually cut your panels to follow the slope.

8) Decide on Fence Material

Wood fences are the most common as they tend to be the most economical and there are several choices available from pressure treated (most cost efficient) to cedar or redwood (more costly) to name a few, but all of them require regular maintenance. Composite and vinyl fences may be more costly upfront but will require less maintenance than natural materials.

7) 6″ x 6″ Fence posts

For proper and secure post-installation use 6” x 6” posts for your wooden fence, not 4” x 4” and remember to properly brace your posts while they are setting. This will ensure your fence and gate are strong.

6) Fence Hinges

Whether you choose to use strap hinges or butt hinges, use 3 sets of hinges instead of 2, as the additional hinge will provide more support to the gate.

5) Proper Hardware for Fence Building

Use galvanized or stainless steel screws and nails as they are resistant to rust and corrosion.

4) Frost Line For Fence Posts

Make sure your fence posts are installed at least 36” deep into the ground, but I would highly suggest 48” deep. Again, the more secure your fence the longer it will last. As a general rule, posts should be at least 6” below the frost line.

3) Expanding Foam for Building a Fence

Make sure your posts are secure and properly installed fill the holes with mixed concrete (mixed in a bucket and not mixed in the hole!) or expanding foam. Personally, I am a HUGE fan of Sika Post Fix. It will save you so much time!

Add Gravel

To prevent water from affecting your fence posts and causing frost heave, add gravel to the bottom of your hole for extra drainage

1) Level Your Fence

This may seem obvious but make sure your fence posts are plum and your fence is level along the top and in a straight line!